Обрати для іншої країни
067 3812333

Sales Email: andrei@procompact.com.ua

troubleshooting troubleshooting
Місцезнаходження:Головна > troubleshooting > General Question > How to disassemble your Nova
Image-1

Як відрегулювати шлях лазерного променя


Image-1

Як встановити нову лазерну трубку


How to disassemble your Nova

Время выпуска:2019/07/08 General Question Время просмотра:256

The Users Guide section will walk you through 6 steps for learning how to disassemble your Nova Note: There’s glass laser tube inside the laser machine, be careful and do not collide with anything when moving.
How to disassemble your laser cutter
Please do as following:
1. Remove the front door, the honeycomb table and the blades. (To reduce the weight and make it easier to move)
How to disassemble your laser cutter
2.Remove the Tower Alarm Lamp;
PS : disconnect the wire from the connector ( 24V4 to green ; 24V5 to red ; 0V3 to black )
How to disassemble your laser cutter How to disassemble your laser cutter
3. Fix the top lid.
How to disassemble your laser cutter
4. Unscrew all the screws at the foot stand. There are 8 screws on each side.
How to disassemble your laser cutter
5. Move the machine upper part with a trolley
How to disassemble your laser cutter
6. After moving all the parts to your room, please reassemble them by fix 8 screws on each side.
End