Обрати для іншої країни
products products
Місцезнаходження:Головна > products > Nova35


Время выпуска:2019/07/01 products Время просмотра:18000


The NOVA laser cutter carries all the best functions like servo motor and excellent engraving quality with high resolution etc.Users can also choose RF tube to reach an even higher cutting and engraving quality.And we also add much more user friendly designs to this excellent series.

know more

Standard Features

Image 01

Hybrid servo motor 1000mm/s speed for engraving photo, super smooth vector cutting quality.
Image 01

Smart board Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
Image 01

Laser software RDWorksV8 laser software.
Image 01

LCD panel Set speed, power, and more directly from the LCD panel.
Image 01

Auto focus Help the user to set focus Easier. (based on motorized table)
Image 01

Motorized table Control the table up/down from LCD panel directly
Image 01

Honey comb table Reduces underside reflections.
Image 01

Aluminum blade cutting table Reduce the influence of the reflection of laser.
Image 01

3D Engrave Engrave high quality 3D photos directly.
Image 01

3D cutting Achieve “3D cutting” on some materials
Image 01

Parameter library Help you to save times.
Image 01

Color mapping Change the working speeds and power by using color settings.
Image 01

Visible Red Dot Pointer Make the laser beam “visible”.
Image 01

High quality laser tube Every laser tube must pass the strict quality control test.
Image 01

High quality optics High quality optics.
Image 01

Mirror mount Thunderlaser easily re-adjusting 3D mirror mounts.
Image 01

Connection ways High-speed Ethernet line or the USB cable line.
Image 01

USB disk interface Thunder laser system supports the USB disk loading.
Image 01

Free Home position Freely change the starting position.
Image 01

Large buffer memory You can take the file directly from the memory.
Image 01

Emergency stop Turn off the machine immediately when there is an accident.
Image 01

Open flap protection Laser will stop working if you open the front cover.
Image 01

Water protection Laser will stop working if the water cooling system is not working
Image 01

Alarm Lamp Show the work state and tell when the job is done, more safe for you.
Image 01

Standard laser head It is the most often used head.
Image 01

Air assist Blowing air to prevent the material being burned
Image 01

The strong machine case Improve the laser machine performance.
Image 01

Exhaust system Ensure the work pieces and laser cutter machine inside be clean.
Image 01

Drive belts This belt is stable performance with long life, wearable and durable.
Image 01

Low-noise cooling fan Operate the laser in a quiet and comfortable surroundings.
Image 01

High quality rails Keep the engraving/cutting precise and very durable.

Technical Specifications

Laser System NOVA 35 NOVA 51 NOVA 63
Laser Tube Wattage 80-130Watt 100-130Watt 100-150Watt
Work Area 900x600mm(35.4″ x 23.6″) 1300x900mm(51.2″x35.4″) 1600x1000mm(63.0″x39.4″)
Max Part Size (WxLxH) Front door closed

1000x730x230mm(39.4″ x 28.7″ x9.0″)

1400x1030x230mm(55.1″ x 40.6″ x9.0″)

1700x1130x230mm(66.9″ x 44.5″ x9.0″)

Pass-through door

1000x∞x20mm(39.4″ x ∞” x0.8″)

1400x∞x20mm(55.1″ x ∞” x0.8″)

1700x∞x20mm(66.9″ x ∞” x0.8″)

Table Size 1000x730mm(39.4″ x 28.7″) 1400x1030mm(55.1″ x40.6″) 1700x1130mm(66.9″ x 44.5″)
Z Axis Height 230mm(9.1″) 230mm(9.1″) 230mm(9.1″)

1500x1105x1040mm(59.1″ x 43.5″ x40.9″)

1900x1405x1040mm(74.8″ x 55.3″ x40.9″)

2200x1505x1040mm(86.6″ x 59.3″ x40.9″)

Net Weight 310kgs(683lbs) 430kgs(948lbs) 470kgs(1036lbs)
Laser Type Sealed Co2 Glass Laser Tube
Cooling Water Cooled
Motion Control System High-Speed Hybrid servo motor
Maximum Speed 1000mm/S(39.4 IPS)
Speed and Power Control (engraving depth) Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes Optimized raster, vector, and combined mode
Resolution(DPI) User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)
Computer Interface Ethernet and USB Connection
Compatible Operating Systems Windows XP/2000/Vista/7/8/10
Buffer Memory 128MB Standard
Display Panel 3.5″ LCD panel showing current file, total working time, laser power, speed etc.
Electrical Requirements 110 to 240 volts, 50 or 60 Hz, single phase
Ventilation System Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.
Standard Features Red dot pointer, Auto focus, Motorized table, Pass-through Door, Air Assist, Water pump ,Exhaust fan, HoneyComb Table, 2″ (50.8 mm) Focus Lens, Easily adjustable Home position, LCD Display,3D Engraving ,”No water” protection, Emergency stop, Maintenance mode, Open cover protection,Hybrid servo motor
Optional Features
High Resolution Head Increase the resolution up to 1000DPI
Rotary Axis Use to engrave on round items
Water Chiller Improve the cooling of laser tube

Machine Size

nova35 size nova35-100w size nova51 size nova63 size

Optional Items

Water Chiller When the laser tube is working, it will produce a large amount of heat.Since the water chiller has the refrigerating capacity and can adjust the temperature intelligently to keep the temperature within a certain range, there by to ensure the stability of laser working.
Rotary Axis Rotary engraving equipment was used to extending THUNDERLASER system application, as a optional component, It can be used for cutting and engraving round items…
Heat Alarm Detector A thermal detector is designed for areas where a fire will be more flame and heat than smoke; areas such as laser cutter and engraver, kitchens, garages and workshops. The small thermal heat detector will also have a 10 year, long life battery…
HR laser head We named Hight-Resolution head as HR head for short,it’s made by special structure for focusing the laser bean into a much smaller dot,thus we can get more tiny laser dots in a unit area,and the engraving result will be more elaborate…
4″ laser head 4″ laser head owns a longer focal distance than 2″ standard head, thus for cutting thick material, it makes the cutting edge more smooth and straight…
Air compressor The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator…


If your material is not in the below list, our Applications Team would be happy to assist you to test it.
Materials Engrave Cut


Mat Board

Wood Veneer
Anodized Aluminum X
Painted Metals X
Tile X
Glass X
Coated Metals X
Ceramics X
Marble X
Stainless Steel * X
Brass * X
Titanium * X
Bare Metal * X
* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.



No need. We’ve added a parameter library in the software, once you find out what settings is best for a certain material;you can record it in the parameter library. Next time you cut the same material, you just need to read it from the list.
Both ok, as long as your operating system is Windows XP/2000/Vista/7/8/10.
Our laser runs on Windows XP/2000/Vista/7/8/10 both 32bits and 64bits system. But it does not run on Mac OS.
CorelDraw and AutoCAD are suggested. You can design all your artworks in these two software and then send to the RDWorks software to set the parameters easily.
Yes, you can take a photo by using a camera and then load the photo to the software directly and engrave it.
the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube) https://www.thunderlaser.com.ua/how-to-use-your-laser-machine/how-to-setup-your-mini60-laser-system.html https://www.thunderlaser.com.ua/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cutter.html
As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too. https://www.thunderlaser.com.ua/video/what-laser-cutter-can-create.html https://www.thunderlaser.com.ua/video/how-to-use-your-laser-machine.html https://www.thunderlaser.com.ua/video/how-to-use-your-laser-software.html
No, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.
Пов\\\'язані сторінки
  • Class 1 Laser Cutter

    Class 1 Nova – Laser System   Class 1 laser cutter comes with the same f...

  • Nova24 Nova24

    Nova24 – Laser System   With a reasonable size, the Nova24 laser is real...

  • Mars Laser Cutter

    Mars – Laser System   Installed with the high speed servo motor systems,...

  • Nova 51 Nova 51

    Nova – Laser System   The NOVA laser cutter carries all the best functio...

  • Nova 63 Nova 63

    Nova – Laser System   The NOVA laser cutter carries all the best functio...